Skip to content
Machining cost calculator

Machining cost calculator: find your lowest cost per part

The lowest-cost cutting system is the one with the lowest total cost per part — tooling + machine time + tool changes + presetting — not the cheapest tool. Example: a $60 end mill that lasts 400 parts adds $0.15 per part in tooling; if it runs the part 2 minutes faster at a $90/hour shop rate, it saves $3.00 per part in machine time, 20 times its tooling cost. Put in your own numbers below.

Your numbers

Your shop — pick the closest

Typical US rates — adjust anything below to your shop.

CurrentRobbJack
Price per tool
Parts per tooltool life
Machining time / partmin
Shop rates & times
Machine rate$/hr
Shop labor rate$/hr
Tool-change timemin
Presetting timemin
Presetter rate$/hr

Defaults model a RobbJack tool at 4× the tool life and a faster cycle — conservative vs. our published case studies. Tune every field to your shop.

Your savings with RobbJack

$10,781per year

That's 37% lower total cost and $53,906 over five years — on 5,000 parts a year.

$53,906
5-year savings
37%
lower annual cost
4×
tool life
37%
lower cost / part
7
parts to pay for itself

Total annual cost

Current tooling$29,125
RobbJack$18,344

Where the savings come from

Tooling
$3,000
Machining time
$7,125
Tool changes
$281
Tool presetting
$375

Cumulative savings

Yr 1Yr 2Yr 3Yr 4Yr 5$54k

All-in cost per part

Current$5.83
RobbJack$3.67

Includes tooling, machining time, tool changes, and presetting — not just the sticker price of the tool.

The numbers aren't hypothetical

Real shops, real parts, documented results. Every claim links to the proof.

Get this as a tailored report

We'll send your numbers to your local application engineer, who'll validate them on your actual part and recommend the exact tool. No obligation.

We never sell your data. Reply-to goes straight to you.

We use this information to respond to your request and route it to the authorized RobbJack representative for your area. Privacy Policy

Estimates for illustration only, calculated from the figures you enter. Actual savings depend on your parts, materials, machines, and run conditions and are not guaranteed. Case-study results reflect specific customer applications; your results will vary.

You save $10,781/yrSee the breakdown →

Cost per part — common questions

Which cutting system has the lowest cost per part?

The one with the lowest TOTAL cost per part: tooling cost ÷ parts per tool, plus machine time × shop rate, plus the time lost to tool changes and presetting. Machine time is usually the largest term, so a tool that cuts faster or lasts longer often wins even when it costs more. The calculator on this page adds all four for your job.

How do you calculate machining cost per part?

Cost per part = (tool price ÷ parts per tool) + (cycle minutes × shop rate ÷ 60) + (tool-change and presetting minutes per tool × shop rate ÷ 60 ÷ parts per tool). Example: $60 tool, 400 parts, 6-minute cycle, $90/hour, 10 minutes per tool change: $0.15 + $9.00 + $0.04 = $9.19 per part.

This calculator models the four cost centers from RobbJack's original Cost Evaluation Worksheet. Results are estimates based on the numbers you enter; your local application engineer will validate them on your actual part. Case-study figures are documented results from specific applications and will vary by job.

Prefer a spreadsheet? Download the classic machining cost calculation Excel worksheet (free, no signup) and run the same numbers offline.