CPCD-203-08
CPCD-203 Series 2 Flute Standard Length Composite Drill Point Router
PCD Composite Finish Drill Point Router 0.25-in Dia, 2 Flute, 0.5625-in LOC, 2-in OAL
Best trimming tool for composites — no delamination, no uncut fibers, no fiber pull out.
- 118° drill point lets the tool plunge straight into the part without blowing out the back side
- Over 13,000 linear inches of cut in aircraft CFRP material
- No delamination, no uncut fibers, no fiber pull out — the guide's 'Best Trimming Tool for Composites'
- 2 flute PCD diamond tips, resharpenable, 10-20X tool life over carbide
- CPCD-203 inch sizes 1/8" to 3/4" (flute lengths 5/16"-7/8", OAL 1-1/2" to 4")
- MCPCD-203 metric drill-point and square-end versions in 3, 6, 10, 12mm
- Proven on wing-spar trimming; part of a case study with $548,000 cost savings per year
- Tolerances: cutting dia +/-.003, shank dia -.0001/-.0002, OAL +/-.060
From the RobbJack Applications Guide.
About this series
CPCD-203 PCD-Tipped Composite Routers
The best trimming tool for composites.
The CPCD-203 is a 2-flute PCD-tipped router with a 118 degree drill point for trimming composites. It plunges into the part without blowing out the back side, and produces no delamination, no uncut fibers, and no fiber pull-out. The tool can be re-sharpened and has demonstrated over 13,000 linear inches in aircraft CFRP material. A new PCD grade and geometries are specifically designed for CFRP materials.
- 2-flute PCD-tipped with 118 degree drill point for plunging without back-side blowout
- No delamination, no uncut fibers, no fiber pull-out
- Re-sharpenable
- Over 13,000 linear inches in aircraft CFRP material
- New PCD grade and geometries specifically designed for CFRP
- Quantity discounts available at Qty 7, 13 and 20+
Composites / CFRP. Dry, Wet, Cold Air, or Spray Mist. Applications: slotting, side milling, helical interpolation, ramping, roughing, semi-finishing, finishing.
Headline spec
10-20X tool life over carbide
Best for
- Trimming composites without delamination or fiber pull-out
- Plunge-and-trim of aircraft CFRP parts (e.g. wing spars)
Specifications
US machining terms with ISO 13399 codes.
- Cutting DiameterDC
- 0.25″
- Diameter ToleranceDC tol
- 0.0030/-0.0030
- Max Cutting DiameterDCX
- 0.253″
- Shank DiameterDMM
- 0.25″
- Length of Cut (LOC)APMX
- 0.5625″
- Overall Length (OAL)OAL
- 2″
- Number of FlutesNOF
- 2
- End Type
- 118º Drill Tip
- Center Cutting
- Yes — plunges
- Tip Material
- Brazed PCD (polycrystalline diamond)
- Re-sharpenable
- Yes
- Series
- CPCD-203 — CPCD-203 Series 2 Flute Standard Length Composite Drill Point Router
Cuts these materials
Applications
Features
See it run
Tolerances
| Type | Min | Max |
|---|---|---|
| Cutting Diameter | +0.003 | -0.003 |
| Length of Cut | +0.03 | -0.03 |
| Overall Length | +0.06 | -0.06 |
| Shank Diameter | -0.0001 | -0.0002 |
Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.
Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.
Adds Uncoated · $402.25 — our pick for your material. Choose another finish below.
Proven in the field
- $548,290saved per year drilling carbon-fiber aircraft
- $216,000saved per year trimming aircraft skins
- 1,000%metal-removal increase in Inconel 718 (SPS)
Finishes (1)
Uncoated
CPCD-203-08
$402.25
Available to order
Starting at
$402.25
Performance guaranteed
More in the CPCD-203 series
Same series, different size — what changes from this tool is shown in red.