Skip to content
End MillRouterMade in USA

MC1-201-02

2 Flute Standard Length Metric C-2 Grade Carbide End Mill

2mm Dia 2-Flute Metric End Mill 8mm LOC, 3mm Shank, 38mm OAL

2 Flute Standard Length Metric C-2 Grade Carbide End Mill — MC1-201-02
Series photo — representative of the MC1-201 family
OAL 38 mmFlute 8 mmShank Ø3 mmCutter Ø2 mmSquare
Scaled drawing — true to this tool's dimensions (mm)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack C1-201-16 two flute C-2 grade carbide end mill, 1/2 inch diameter standard length

C-2 grade carbide end mills — the economical 30° helix workhorse for aluminum, plastics and composites.

  • 2 flute (C1-201), 3 flute (C1-301) and 4 flute (C1-401) standard-length square end, all 30° helix
  • C-2 grade carbide substrate
  • 15 inch sizes per flute count from 1/16" to 3/4" diameter, shank matches cutting diameter from 5/32" up
  • DLC (Diamond-Like Carbon) coated versions of every size (-DLC)
  • Metric MC1-201/MC1-301 from 2mm to 25mm diameter
  • Materials: aluminum, copper, magnesium, plastics, composites, brass
  • Tolerances: cutting dia +.000/-.002, shank dia -.0001/-.0002, OAL +/-.060
  • 2 flute rated for slotting, side milling and helical interpolation; 3 and 4 flute for side milling

From the RobbJack Applications Guide.

About this series

MC1 Metric C-2 Grade Carbide Standard Length End Mills

Metric standard-length C-2 carbide end mills.

The MC1 series is the metric version of the C1 standard-length line: 2-flute (MC1-201) and 3-flute (MC1-301) C-2 grade solid carbide end mills with a 30-degree helix and square end, in cutting diameters from 2 mm to 25 mm.

  • C-2 grade carbide
  • Standard length
  • 30-degree helix
  • Square end
  • 2-flute and 3-flute versions

Aluminum, Copper, Magnesium, Plastics, Composites, Brass. Diamond-Like Carbon (DLC) coating available; dry, wet, cold air, or spray mist.

Headline spec

Cutting diameters 2-25 mm; C-2 grade carbide, standard length.

Best for

  • Slotting
  • Side Milling
  • Helical Interpolation
  • Conventional machining
  • High Performance machining
  • Roughing
  • Semi-Finishing
  • Finishing

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
2 mm
Diameter ToleranceDC tol
0.000/-0.002
Shank DiameterDMM
3 mm
Length of Cut (LOC)APMX
8 mm
Overall Length (OAL)OAL
38 mm
Number of FlutesNOF
2
Helix AngleFHA
30°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
Shank Blend Angle
15°
End Type
Square End
Center Cutting
Yes — plunges
Series
MC1-201 — 2 Flute Standard Length Metric C-2 Grade Carbide End Mill

Cuts these materials

AluminumCopper & BrassMagnesiumPlasticsComposites

Applications

SlottingSide MillingHelical InterpolationConventionalHigh PerformanceRoughingSemi-FinishingFinishingDryWetCold AirSpray Mist

See it run

Tolerances

TypeMinMax
Cutting Diameter0-0.002
Length of Cut+0.030
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002
Starting at$26.65

Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds Diamond-Like Carbon (DLC) · $30.00 — our pick for your material. Choose another finish below.

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Finishes (2)

Compare tool coatings →

Starting at

$26.65

Performance guaranteed

More in the MC1-201 series

Same series, different size — what changes from this tool is shown in red.