MPM-106-04
1 Flute Up Shear Tuffy Grade Carbide Router Polished Flute for Plastics
0.15748-in Dia 1-Flute End Mill, 0.472441-in LOC, 0.23622-in Shank, 1.9685-in OAL
Best tool for plastics — polished single flute that eliminates material sticking to the tool and melting in the cut.
- 1 flute polished-flute design gives the chip the whole gullet, so soft plastics evacuate before they can re-weld or melt in the cut
- PM = up-shear (pulls chips up and out, best general chip clearance); PMD = down-shear (pushes down on the material for clean top surfaces and thin sheet hold-down); GTS = 2 flute straight (0° helix) for materials that must not lift at all
- Tuffy grade carbide substrate
- PM sizes 1/8"-1/2" including long versions (PM-108-06L, PM-108-08L); PMD in 1/8", 3/16", 1/4"; GTS in 1/8"-1/2"
- Metric MPM up-shear from 4mm to 12mm
- Also the best tool for gummy/soft aluminum — polished flute reduces material sticking to the tool
- Tolerances: cutting dia +0.000/-0.002, shank dia -0.0001/-0.0002, flute length +0.060/-0.000, OAL +/-0.060
- Materials: plastics, wood, aluminum; dry, wet, cold air, or spray mist
From the RobbJack Applications Guide.
About this series
MPM Metric Upshear Tuffy Grade Carbide Router Bits
The best tool for gummy or soft aluminum.
The MPM series is a metric line of 1-flute Tuffy grade carbide upshear router bits with a polished flute and square end. Engineered as the best tool for gummy or soft aluminum, the polished flute reduces material sticking to the tool. Cutting diameters range from 4 mm to 12 mm.
- 1 flute
- Polished flute
- Square end
- Upshear geometry
- Tuffy grade carbide
- Reduces material sticking to the tool
Aluminum, Plastics, Wood. Dry, wet, cold air, or spray mist.
Headline spec
Cutting diameters 4-12 mm; 1-flute polished metric upshear router.
Best for
- Gummy or soft aluminum
- Slotting
- Side Milling
- Helical Interpolation
- Ramping
- Roughing
- Semi-Finishing
- Finishing
Specifications
US machining terms with ISO 13399 codes.
- Cutting DiameterDC
- 4 mm
- Diameter ToleranceDC tol
- 0.000/-0.002
- Shank DiameterDMM
- 6 mm
- Length of Cut (LOC)APMX
- 12 mm
- Overall Length (OAL)OAL
- 50 mm
- Number of FlutesNOF
- 1
- Helix AngleFHA
- 25°
- Helix HandFHH
- Right-hand
- Cut Direction
- Right-hand cut
- Shank Blend Angle
- 15°
- End Type
- Square End
- Center Cutting
- Yes — plunges
- Series
- MPM — 1 Flute Up Shear Tuffy Grade Carbide Router Polished Flute for Plastics
Cuts these materials
Applications
Features
See it run
Tolerances
| Type | Min | Max |
|---|---|---|
| Cutting Diameter | 0 | -0.002 |
| Length of Cut | +0.06 | 0 |
| Overall Length | +0.06 | -0.06 |
| Shank Diameter | -0.0001 | -0.0002 |
Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.
Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.
Adds Uncoated · $61.90 — our pick for your material. Choose another finish below.
Proven in the field
- $548,290saved per year drilling carbon-fiber aircraft
- $216,000saved per year trimming aircraft skins
- 1,000%metal-removal increase in Inconel 718 (SPS)
Finishes (1)
Uncoated
MPM-106-04
$61.90
Available to order
Starting at
$61.90
Performance guaranteed
More in the MPM series
Same series, different size — what changes from this tool is shown in red.