Skip to content
End MillRouterPCDMade in USA

PCD-203-16

PCD Diamond 2 Flute Standard Length Square End Route

PCD Router 0.5-in Dia, 2 Flute, 1-in LOC, 3-in OAL

PCD Diamond 2 Flute Standard Length Square End Route — PCD-203-16
Series photo — representative of the PCD-203 family
OAL 3″Flute 1″Shank Ø0.5″Cutter Ø0.5″Square
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack PCD-tipped router bits, drill point and square end versions with black polycrystalline diamond tips

PCD-tipped diamond routers — 10-20X tool life over carbide, resharpenable, in square end and ball nose.

  • 2 flute polycrystalline diamond (PCD) tipped router bits — 10-20X tool life over carbide, and unlike coatings the PCD tip can be resharpened
  • PCD-203 square end standard length: 1/8" to 3/4" cutting diameter, shank matches diameter, up to 1" flute and 4" OAL
  • PCD-203-XX-CF versions with new PCD grade and geometries specifically designed for CFRP carbon fiber
  • PCD-201BN 2 flute ball end stub length: 1/8" to 3/4" diameter
  • Materials: composites, aluminum, copper, magnesium, plastics, brass
  • Quantity discounts at 7, 13 and 20+ pieces
  • Tolerances: cutting dia +/-.003, shank dia -.0001/-.0002, flute length +/-.030, OAL +/-.060
  • Slotting, side milling, helical interpolation, ramping; dry, wet, cold air, or spray mist

From the RobbJack Applications Guide.

About this series

PCD Diamond-Tipped Routers

Diamond wear life for the most abrasive composites.

RobbJack PCD diamond-tipped routers bring proven carbide geometries together with the wear resistance of polycrystalline diamond — for trimming and routing abrasive composites, graphite and non-ferrous materials at far longer tool life than carbide. Offered in 2-flute ball-end and square-end, stub and standard lengths; the PCD tips can be re-sharpened.

  • PCD-tipped — 10–30× the life of carbide in abrasive composites
  • 2-flute ball-end and square-end, stub and standard lengths
  • Inch (PCD) and metric (MCPCD) sizes
  • Re-sharpenable diamond tips

Best for

  • Carbon fiber / CFRP
  • Graphite
  • Abrasive non-ferrous & G10

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.5″
Diameter ToleranceDC tol
0.0030/-0.0030
Max Cutting DiameterDCX
0.503″
Shank DiameterDMM
0.5″
Length of Cut (LOC)APMX
1″
Overall Length (OAL)OAL
3″
Number of FlutesNOF
2
End Type
Square End
Center Cutting
Yes — plunges
Tip Material
Brazed PCD (polycrystalline diamond)
Re-sharpenable
Yes
Series
PCD-203 — PCD Diamond 2 Flute Standard Length Square End Route

Cuts these materials

AluminumCopper & BrassMagnesiumPlasticsComposites

Applications

SlottingSide MillingHelical InterpolationRampingRoughingSemi-FinishingFinishingDryWetCold AirSpray Mist

Features

PCD Diamond

See it run · 2 videos

Tolerances

TypeMinMax
Cutting Diameter+0.003-0.003
Length of Cut+0.03-0.03
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002
Starting at$743.00

Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds Uncoated · $743.00 — our pick for your material. Choose another finish below.

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Finishes (1)

  • Uncoated

    PCD-203-16

    $743.00

    Available to order

Compare tool coatings →

Starting at

$743.00

Performance guaranteed

More in the PCD-203 series

Same series, different size — what changes from this tool is shown in red.