Skip to content
End MillRouterMade in USA

SR-2-019

2 Flute Standard Length Tuffy Grade Miniature End Mill

0.019-in Dia 2-Flute End Mill, 0.057-in LOC, 0.125-in Shank, 1.5-in OAL

OrderingSR-2-019·Uncoated·$33.65Change finish

2 Flute Standard Length Tuffy Grade Miniature End Mill — SR-2-019
Series photo — representative of the SR-2 family
OAL 1.5″Flute 0.057″Shank Ø0.125″Cutter Ø0.019″Square
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack SR-2-060 two-flute standard-length Tuffy grade miniature carbide end mill

Standard-length miniature end mills — deeper reach in every .001-inch size from stock

  • Every .001-inch diameter from .005 to .062 is standard — all shipped from stock (SR-2 table runs .010–.062)
  • Hand-selected to any diameter to the nearest .0002-inch under .062
  • Standard flute lengths (3x diameter, e.g. SR-2-010 has a .0300-in flute) for deeper miniature slots and walls
  • 2 flute, 30-degree helix, square end; ball end (SR-2BN) and 4 flute (SR-4) versions available
  • Tuffy grade sub-micrograin carbide, rated for materials up to 40 HRc
  • Tight tolerances: cutting diameter +/-.0005-in, shank diameter -.0001/-.0002-in, flute length +.003/-.000-in
  • Uniform 1/8-in shank and 1-1/2-in overall length across the range (metric MSR: 3 mm shank, 38 mm OAL)
  • Coatings available: TiN (-T), TiCN (-C), AlTiN (-A) and DLC (-DLC)

From the RobbJack Applications Guide.

About this series

SR Tuffy Grade Miniature End Mills

Standard-length miniatures for added reach — any size, hand-selected.

RobbJack SR standard-length Tuffy Grade miniature end mills offer longer flute lengths than the stub-length SS for reaching deeper features, in EVERY .001" diameter from .010" to .062" as standard. Like all RobbJack miniatures, sizes in between are available hand-selected to any diameter to the nearest .0002" under .062". Ball-end (SR-2BN) and 4-flute (SR-4) variants are also available.

  • Every .001" diameter from .010" to .062" is standard
  • Hand-selected to ANY diameter in .0002" steps under .062"
  • 2 flute, square end, 30° helix, standard length for reach
  • Ball-end (SR-2BN) and 4-flute (SR-4) variants
  • Cutting dia. tolerance ±.0005"

Available uncoated and in TiN, TiCN, AlTiN, and Diamond-Like Carbon (DLC) coatings

Headline spec

Cutting diameters .010"–.062" in .001" increments; 1/8" shank; 1-1/2" OAL

Best for

  • Deeper micro features
  • Dental & medical
  • Electronics
  • Die/mold detail

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.019″
Diameter ToleranceDC tol
0.0005/-0.0005
Max Cutting DiameterDCX
0.0195″
Shank DiameterDMM
0.125″
Length of Cut (LOC)APMX
0.057″
Overall Length (OAL)OAL
1.5″
Number of FlutesNOF
2
Helix AngleFHA
30°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
Shank Blend Angle
15°
End Type
Square End
Center Cutting
Yes — plunges
Hand-Select
Available — any diameter to the nearest .0002"
Series
SR-2 — 2 Flute Standard Length Tuffy Grade Miniature End Mill

Cuts these materials

AluminumCopper & BrassTitaniumMagnesiumCast IronSteelStainless SteelSuperalloys (Inconel…)PlasticsCompositesHardened 30–40 HRcWood

Applications

SlottingSide MillingHelical InterpolationRampingHigh PerformanceRoughingSemi-FinishingFinishingDryWetCold AirSpray MistMiniature

See it run

Tolerances

TypeMinMax
Cutting Diameter+0.0005-0.0005
Length of Cut+0.0030
Overall Length+0.040
Shank Diameter-0.0001-0.0002

Choose the finish(5 options)

Compare →

Each finish is a different part number and price.

Not sure? Compare tool coatings — or leave it uncoated, the most common choice for aluminum.

Uncoated · your price$33.65

Part SR-2-019

Made & shipped in the USA · lead time confirmed at order. Test this tool in your spindle at retail, or get it through your RobbJack distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds SR-2-019 · Uncoated · $33.65

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Uncoated

$33.65

SR-2-019

Starting speeds & feeds for the SR-2-019

Dial in for your machine →

RobbJack's tested starting numbers for this exact tool, from the same engine and the same default machine as the calculator: a 12,000 RPM / 400 IPM / 30 HP machining center, rigid setup, full-depth cut. A faster or smaller spindle changes the RPM and feed — enter yours in the calculator and it re-governs every number.

Starting speeds and feeds for RobbJack SR-2-019
MaterialOperationSFMRPMFeed (IPM)Chip load / toothDOC (in)WOC (in)
6061(T4-T6) AluminumRoughing — full slot6012,0004.8.00020.0095.0190
6061(T4-T6) AluminumFinishing6012,0002.4.00010.0190.0010
Free-Cutting BrassRoughing — full slot6012,0004.8.00020.0095.0190
Free-Cutting BrassFinishing6012,0002.4.00010.0190.0010
6AL-4V TitaniumRoughing — full slot6012,0002.4.00010.0048.0190
6AL-4V TitaniumFinishing6012,0002.4.00010.0190.0005

Read before you run

Recommendations are computed starting points based on typical conditions — not guarantees of performance, tool life, or fitness for your application. Machining involves inherent risk: you are solely responsible for safe operation, for verifying every parameter against your machine, spindle, toolholding, workholding, and guarding limits, and for proving all parameters on a test cut before production. RobbJack Corporation assumes no liability for tool breakage, machine damage, scrapped parts, production loss, or personal injury arising from use of these recommendations. By using this calculator you accept RobbJack's Terms & Conditions.

More in the SR-2 series

Same series, different size — what changes from this tool is shown in red.