Skip to content
End MillRouterMade in USA

SS-2-008

2 Flute Stub Length Tuffy Grade Miniature End Mill

0.008-in Dia 2-Flute End Mill, 0.016-in LOC, 0.125-in Shank, 1.5-in OAL

OrderingSS-2-008·Uncoated·$54.00Change finish

2 Flute Stub Length Tuffy Grade Miniature End Mill — SS-2-008
Series photo — representative of the SS-2 family
OAL 1.5″Flute 0.016″Shank Ø0.125″Cutter Ø0.008″Square
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack SS-2-062 two-flute stub-length Tuffy grade miniature carbide end mill

The best miniature tools in any size as standard — stub length for maximum rigidity

  • Every .001-inch diameter from .005 to .062 is standard — all shipped from stock
  • Hand-selected to any diameter to the nearest .0002-inch under .062
  • Stub flute lengths (approx. 1.5x diameter, e.g. SS-2-010 has a .0150-in flute) for maximum rigidity at miniature scale
  • 2 flute, 30-degree helix, square end; ball end (SS-2BN) and 4 flute (SS-4) versions available
  • Tuffy grade sub-micrograin carbide, rated for materials up to 40 HRc
  • Tight tolerances: cutting diameter +/-.0005-in, shank diameter -.0001/-.0002-in, flute length +.003/-.000-in
  • Uniform 1/8-in shank and 1-1/2-in overall length across the range (metric MSS: 3 mm shank, 38 mm OAL)
  • Coatings available: TiN (-T), TiCN (-C), AlTiN (-A) and DLC (-DLC)

From the RobbJack Applications Guide.

About this series

SS Tuffy Grade Miniature End Mills

Every .001″ is standard — and we'll hand-select any size in between.

RobbJack SS stub-length Tuffy Grade miniature end mills are stocked in EVERY .001" diameter from .005" to .062" as standard. Need a size in between? Under .062" we hand-select tools to any diameter to the nearest .0002" — a .0376" tool is a regular order, not a special. Ball-end (SS-2BN) and 4-flute (SS-4) variants are also offered. Customers report these tools run faster and longer than any others they have tried.

  • Every .001" diameter from .005" to .062" is standard, shipped from stock
  • Hand-selected to ANY diameter in .0002" steps under .062" (e.g. .0376")
  • 2 flute, square end, 30° helix, stub length for rigidity
  • Ball-end (SS-2BN) and 4-flute (SS-4) variants
  • Tight tolerances held in microns

Available uncoated and in TiN, TiCN, AlTiN, and Diamond-Like Carbon (DLC) coatings

Headline spec

Cutting diameters .005"–.062" in .001" increments; 1/8" shank; 1-1/2" OAL

Best for

  • MEMS & nanotechnology
  • Dental & medical
  • Electronics
  • Die/mold detail

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.008″
Diameter ToleranceDC tol
0.0005/-0.0005
Max Cutting DiameterDCX
0.0085″
Shank DiameterDMM
0.125″
Length of Cut (LOC)APMX
0.016″
Overall Length (OAL)OAL
1.5″
Number of FlutesNOF
2
Helix AngleFHA
30°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
Shank Blend Angle
15°
End Type
Square End
Center Cutting
Yes — plunges
Hand-Select
Available — any diameter to the nearest .0002"
Series
SS-2 — 2 Flute Stub Length Tuffy Grade Miniature End Mill

Cuts these materials

AluminumCopper & BrassTitaniumMagnesiumCast IronSteelStainless SteelSuperalloys (Inconel…)PlasticsCompositesHardened 30–40 HRcWood

Applications

SlottingSide MillingHelical InterpolationRampingHigh PerformanceRoughingSemi-FinishingFinishingDryWetCold AirSpray MistMiniature

See it run

Tolerances

TypeMinMax
Cutting Diameter+0.0005-0.0005
Length of Cut+0.0030
Overall Length+0.040
Shank Diameter-0.0001-0.0002

Choose the finish(5 options)

Compare →

Each finish is a different part number and price.

Not sure? Compare tool coatings — or leave it uncoated, the most common choice for aluminum.

Uncoated · your price$54.00

Part SS-2-008

Made & shipped in the USA · lead time confirmed at order. Test this tool in your spindle at retail, or get it through your RobbJack distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds SS-2-008 · Uncoated · $54.00

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Uncoated

$54.00

SS-2-008

More in the SS-2 series

Same series, different size — what changes from this tool is shown in red.