Skip to content
End MillMade in USA

TR-404-04

4 Flute Standard Length Tuffy Grade Carbide End Mill

0.125-in Dia 4-Flute End Mill, 0.5-in LOC, 0.125-in Shank, 1.5-in OAL

4 Flute Standard Length Tuffy Grade Carbide End Mill — TR-404-04
Series photo — representative of the TR-404 family
OAL 1.5″Flute 0.5″Shank Ø0.125″Cutter Ø0.125″Square
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack TR Series Tuffy grade carbide end mill, standard length with shank flats

3, 4, and 6 flute Tuffy grade carbide end mills in standard length -- a high-performance general line from 1/8" to 1" that runs in everything from aluminum and titanium to steel.

  • Three sub-series: TR-303 (3 flute), TR-404 (4 flute) from 1/8" to 3/4", and TR-606 (6 flute) at 1" diameter, all standard length, square end, 30-degree helix
  • Rated for high performance work: 3 flute covers slotting and side milling from roughing through finishing; 4 and 6 flute cover side milling, semi-finishing, and finishing
  • Shank flats on the 3/8", 1/2", 5/8", 3/4", and 1" sizes (smaller and in-between sizes do not come with flats); order any tool without flats by adding 'NF' to the tool number
  • Tolerances: cutting diameter +.001/-.000, shank diameter -.0001/-.0002, flute length +.030/-.000 (1/8" to 5/16") or +.060/-.000 (3/8" to 3/4"; TR-606 +.060/-.000), OAL +/-.060
  • Available uncoated or in TiN, TiCN, AlTiN, and DLC coatings
  • Materials: aluminum, copper, titanium, magnesium, cast iron, steel, brass, and wood; run dry, wet, cold air, or spray mist

From the RobbJack Applications Guide.

About this series

TR Standard / Extra Length Tuffy Grade Carbide End Mills

3, 4 and 6 flute square-end mills for steel and high-temp alloys

The TR series is a square-end Tuffy Grade carbide end mill with a 30 degree helix, offered in 3 flute (TR-303), 4 flute (TR-404) and 6 flute (TR-606) configurations. Many sizes come with flats; any tool can be ordered without flats by adding 'NF' to the tool number. Available uncoated and with TiN, TiCN, AlTiN and DLC coatings.

  • Square end with 30 degree helix
  • 3, 4 and 6 flute configurations
  • Comes with flats; order without flats by adding 'NF' to the tool number
  • Uncoated or TiN, TiCN, AlTiN, and DLC coated

Aluminum, copper, titanium, magnesium, cast iron, steel, brass, wood

Headline spec

30 degree helix, 3/4/6 flute, with flats

Best for

  • Slotting
  • Side milling
  • High performance roughing through finishing

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.125″
Diameter ToleranceDC tol
0.0010/0.0000
Max Cutting DiameterDCX
0.126″
Shank DiameterDMM
0.125″
Length of Cut (LOC)APMX
0.5″
Overall Length (OAL)OAL
1.5″
Number of FlutesNOF
4
Helix AngleFHA
30°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
End Type
Square End
Center Cutting
Yes — plunges
Series
TR-404 — 4 Flute Standard Length Tuffy Grade Carbide End Mill

Cuts these materials

AluminumCopper & BrassTitaniumMagnesiumCast IronSteel

Applications

Side MillingHigh PerformanceSemi-FinishingFinishingDryWetCold AirSpray Mist

See it run

Tolerances

TypeMinMax
Cutting Diameter+0.0010
Length of Cut+0.030
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002
Starting at$29.85

Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds Aluminum Titanium Nitride (AlTiN) · $31.65 — our pick for your material. Choose another finish below.

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Finishes (5)

Compare tool coatings →

Starting at

$29.85

Performance guaranteed

More in the TR-404 series

Same series, different size — what changes from this tool is shown in red.