Skip to content
End MillMade in USA

TS-401-02

4 Flute Stub Length Tuffy Grade Carbide End Mill

0.0625-in Dia 4-Flute End Mill, 0.125-in LOC, 0.125-in Shank, 1.5-in OAL

4 Flute Stub Length Tuffy Grade Carbide End Mill — TS-401-02
Series photo — representative of the TS-401 family
OAL 1.5″Flute 0.125″Shank Ø0.125″Cutter Ø0.0625″Square
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack TS-201 2-flute stub length Tuffy grade carbide end mill

Stub-length Tuffy grade square end mills in 2, 3, and 4 flute — short, rigid general-purpose cutters offered in five coating options.

  • Square end stub-length Tuffy grade carbide in three flute counts: TS-201 (2 flute), TS-301 (3 flute), TS-401 (4 flute), all with 30° helix
  • Stub flute lengths for rigidity — e.g. 1/4" diameter carries only a 1/2" flute length on a 2" OAL
  • Inch sizes 1/16"–3/4" (2 and 4 flute; 3 flute runs 1/16"–1/2"); metric MTS-401 4 flute covers 2–20 mm
  • Five coating options across the line: Uncoated, TiN, TiCN, AlTiN, and Diamond-Like Carbon (DLC) — ordered by suffix (-T, -C, -A, -DLC)
  • 2 and 3 flute rated for slotting, side milling, and helical interpolation; 4 flute optimized for side milling
  • Broad material range: aluminum, copper, titanium, magnesium, cast iron, steel, brass (plus wood on 2/3 flute)
  • High-performance roughing, semi-finishing, and finishing — dry, wet, cold air, or spray mist
  • Tolerances: cutting dia +.000/−.002 (1/16"–1/4") and +.000/−.003 (5/16"–3/4"); shank −.0001/−.0002; MTS cutting dia +.000/−.075 mm

From the RobbJack Applications Guide.

TS-301 3-flute stub length Tuffy grade carbide end mill
TS-401 4-flute stub length Tuffy grade carbide end mill

About this series

TS / MTS Stub Length Tuffy Grade Carbide End Mills

2, 3 and 4 flute stub-length square-end mills for steel and a wide range of materials

The TS series is a stub-length, square-end Tuffy Grade carbide end mill offered in 2 flute (TS-201), 3 flute (TS-301) and 4 flute (TS-401) configurations, with a 30 degree helix. MTS is the metric equivalent. Available uncoated and with TiN, TiCN, AlTiN and Diamond-Like Carbon (DLC) coatings.

  • Square end with 30 degree helix
  • Available in 2, 3 and 4 flute configurations
  • Uncoated or TiN, TiCN, AlTiN, and DLC coated
  • Metric MTS versions available

Aluminum, copper, titanium, magnesium, cast iron, steel, brass, wood

Headline spec

Stub length, 30 degree helix, 2/3/4 flute

Best for

  • Slotting
  • Side milling
  • Helical interpolation
  • High performance roughing through finishing

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.0625″
Diameter ToleranceDC tol
0.0000/-0.0020
Max Cutting DiameterDCX
0.0625″
Shank DiameterDMM
0.125″
Length of Cut (LOC)APMX
0.125″
Overall Length (OAL)OAL
1.5″
Number of FlutesNOF
4
Helix AngleFHA
30°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
Shank Blend Angle
15°
End Type
Square End
Center Cutting
Yes — plunges
Series
TS-401 — 4 Flute Stub Length Tuffy Grade Carbide End Mill

Cuts these materials

AluminumCopper & BrassTitaniumMagnesiumCast IronSteel

Applications

Side MillingHigh PerformanceRoughingSemi-FinishingFinishingDryWetCold AirSpray Mist

See it run

Tolerances

TypeMinMax
Cutting Diameter0-0.002
Length of Cut+0.030
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002
Starting at$28.00

Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds Aluminum Titanium Nitride (AlTiN) · $29.80 — our pick for your material. Choose another finish below.

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Finishes (5)

Compare tool coatings →

Starting at

$28.00

Performance guaranteed

More in the TS-401 series

Same series, different size — what changes from this tool is shown in red.