Skip to content
End MillMade in USA

XF-602-12-090

6 Flute Standard Length Tuffy Grade Carbide End Mill

0.375-in Dia 6-Flute End Mill, 0.875-in LOC, 0.375-in Shank, 2.5-in OAL, 0.09-in CR with Weldon Flats

OrderingXF-602-12-090·Aluminum Titanium Nitride (AlTiN)·$137.75Change finish

6 Flute Standard Length Tuffy Grade Carbide End Mill — XF-602-12-090
Series photo — representative of the XF-602 family
OAL 2.5″Flute 0.875″Shank Ø0.375″Cutter Ø0.375″R0.09″
Scaled drawing — true to this tool's dimensions (inch)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack XF Series 6-flute 45-degree helix Tuffy grade carbide end mill with AlTiN coating

6 and 8 flute, 45° helix Tuffy grade finishers for titanium, steels, and high-temp alloys — cut titanium up to 75 inches per minute.

  • 6 flute (XF-602, 3/8"–3/4") and 8 flute (XF-802, 3/4"–1") Tuffy grade carbide with 45° helix, AlTiN coated
  • Metric MXF line: MXF-602 in 10–16 mm and MXF-802 in 20–25 mm
  • Corner radius on every tool — .030", .060", .090", .120" by size (metric 2.0, 2.5, 3.0 mm); no sharp-corner version
  • Headline claim from the guide: cut titanium up to 75 inches/minute (1905 mm/minute)
  • Materials: titanium, cast iron, steel, stainless steel, and super alloys up to 40 HRc hardness
  • A dedicated side-milling finisher — applications are side milling, high-performance semi-finishing, and finishing (no slotting rating), run dry, wet, cold air, or spray mist
  • XF finish profiling guidance: about .1 × diameter radial width at 1 × diameter axial depth; see the guide's trochoidal tool paths at robbjack.com/robbjack-tv
  • Optional flats (-FL) on every inch size for high-torque holding; metric tools do not have flats
  • Anti-pull-out h4 shank tolerance — tightest in the industry
  • Tolerances: cutting dia −.001/−.002, shank −.0001/−.0002, flute length +.060/−.000 (MXF: cutting dia −.025/−.050 mm)

From the RobbJack Applications Guide.

Light radial, deep axial
Light radial, deep axial — Guide engagement diagrams: slotting at 1 × diameter width and .7 × diameter depth, XG-502 profiling at .5 × diameter radial by 1.5 × diameter axial, and XF finish profiling at just .1 × diameter radial engagement over a full diameter of depth — the multi-flute finishing recipe.

About this series

XF / MXF Tuffy Grade Carbide End Mills

The highest performing tool in steel, stainless & other difficult alloys

The XF Series is a high-flute-count (6 and 8 flute) Tuffy Grade carbide end mill with a 45 degree helix for finishing in steel, stainless and difficult alloys. AlTiN coated, offered as XF-602 (6 flute) and XF-802 (8 flute) and metric MXF equivalents. Anti-pullout shank technology delivers h4 shank tolerance, the tightest in the industry, to eliminate tool pull-out. RobbJack reports up to 15X the life of comparable tools, the ability to cut titanium up to 75 inches/minute (1905 mm/minute), and 304 SS slotting & profiling at 400 sfm / 24 ipm.

  • 6 flute (XF-602) and 8 flute (XF-802) configurations
  • 45 degree helix, square end with corner radius
  • AlTiN coated
  • Anti-pullout shank technology, h4 shank tolerance (tightest in the industry)
  • Available with flats (add -FL); metric MXF tools do not have flats
  • Supports trochoidal tool paths
  • Inch (XF) and metric (MXF) sizes

Titanium, cast iron, steel, stainless steel and super alloys up to 40 HRc hardness. Applications: side milling, high-performance semi-finishing and finishing (dry, wet, cold air or spray mist).

Headline spec

6/8-flute 45-degree-helix Tuffy Grade carbide, AlTiN coated

Best for

  • High-speed finishing of steel and stainless
  • Titanium machining at high feed rates
  • Difficult and super alloys
  • Trochoidal milling

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
0.375″
Diameter ToleranceDC tol
-0.0010/-0.0020
Max Cutting DiameterDCX
0.374″
Shank DiameterDMM
0.375″
Length of Cut (LOC)APMX
0.875″
Overall Length (OAL)OAL
2.5″
Corner RadiusRE
0.09″
Number of FlutesNOF
6
Helix AngleFHA
45°
Helix HandFHH
Right-hand
Cut Direction
Right-hand cut
End Type
Corner Radius
Center Cutting
Yes — plunges
Shank Flats
Available (-FL)
Series
XF-602 — 6 Flute Standard Length Tuffy Grade Carbide End Mill

Cuts these materials

TitaniumCast IronSteelStainless SteelSuperalloys (Inconel…)Hardened 30–40 HRc

Applications

Side MillingHigh PerformanceSemi-FinishingFinishingDryWetCold AirSpray Mist

See it run · 2 videos

Tolerances

TypeMinMax
Cutting Diameter-0.001-0.002
Length of Cut+0.060
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002

Choose the finish(2 options)

Compare →

Each finish is a different part number and price.

AlTiN · your price$137.75

Part XF-602-12-090

Made & shipped in the USA · lead time confirmed at order. Test this tool in your spindle at retail, or get it through your RobbJack distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds XF-602-12-090 · Aluminum Titanium Nitride (AlTiN) · $137.75

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

AlTiN

$137.75

XF-602-12-090

Starting speeds & feeds for the XF-602-12-090

Dial in for your machine →

RobbJack's tested starting numbers for this exact tool, from the same engine and the same default machine as the calculator: a 12,000 RPM / 400 IPM / 30 HP machining center, rigid setup, full-depth cut. A faster or smaller spindle changes the RPM and feed — enter yours in the calculator and it re-governs every number.

Starting speeds and feeds for RobbJack XF-602-12-090
MaterialOperationSFMRPMFeed (IPM)Chip load / toothDOC (in)WOC (in)
6AL-4V TitaniumFinishing3803,87116.3.00070.5625.0094
Gray IronFinishing5255,34835.3.00110.5625.0094
4140 SteelFinishing4004,07517.1.00070.5625.0094

Read before you run

Recommendations are computed starting points based on typical conditions — not guarantees of performance, tool life, or fitness for your application. Machining involves inherent risk: you are solely responsible for safe operation, for verifying every parameter against your machine, spindle, toolholding, workholding, and guarding limits, and for proving all parameters on a test cut before production. RobbJack Corporation assumes no liability for tool breakage, machine damage, scrapped parts, production loss, or personal injury arising from use of these recommendations. By using this calculator you accept RobbJack's Terms & Conditions.

More in the XF-602 series

Same series, different size — what changes from this tool is shown in red.