Skip to content
End MillRouterPCDMade in USA

MCPCD-203-06-118

2 Flute Standard Length Drill Point Metric PCD-Tipped Diamond Router

PCD CFRP Drill Point Router 6mm Dia, 2 Flute, 14mm LOC, 50mm OAL

2 Flute Standard Length Drill Point Metric PCD-Tipped Diamond Router — MCPCD-203-06-118
Series photo — representative of the MCPCD-118 family
OAL 50 mmFlute 14 mmShank Ø6 mmCutter Ø6 mmSquare
Scaled drawing — true to this tool's dimensions (mm)
Speeds & FeedsDialed to this exact tool — free
Free CAD & DataSTEP 3DDXF 2DISO CSVCAM library
RobbJack CPCD-203 PCD-tipped composite router with 118 degree drill point for plunging into carbon fiber

Best trimming tool for composites — no delamination, no uncut fibers, no fiber pull out.

  • 118° drill point lets the tool plunge straight into the part without blowing out the back side
  • Over 13,000 linear inches of cut in aircraft CFRP material
  • No delamination, no uncut fibers, no fiber pull out — the guide's 'Best Trimming Tool for Composites'
  • 2 flute PCD diamond tips, resharpenable, 10-20X tool life over carbide
  • CPCD-203 inch sizes 1/8" to 3/4" (flute lengths 5/16"-7/8", OAL 1-1/2" to 4")
  • MCPCD-203 metric drill-point and square-end versions in 3, 6, 10, 12mm
  • Proven on wing-spar trimming; part of a case study with $548,000 cost savings per year
  • Tolerances: cutting dia +/-.003, shank dia -.0001/-.0002, OAL +/-.060

From the RobbJack Applications Guide.

About this series

MCPCD-203 Metric PCD-Tipped Composite Routers

Metric PCD-tipped routing for composites.

The MCPCD-203 is the metric version of RobbJack's 2-flute PCD-tipped composite routers, available in square-end (standard length) and drill-point (118 degree) configurations. Like the CPCD line, it uses a new PCD grade and geometries specifically designed for CFRP materials.

  • 2-flute PCD-tipped, metric sizes (3mm-12mm)
  • Square-end and 118 degree drill-point configurations
  • New PCD grade and geometries specifically designed for CFRP

Composites / CFRP. Dry, Wet, Cold Air, or Spray Mist. Applications: slotting, side milling, helical interpolation, ramping, roughing, semi-finishing, finishing.

Headline spec

10-20X tool life over carbide

Best for

  • Metric routing and trimming of composite/CFRP parts

Specifications

US machining terms with ISO 13399 codes.

Cutting DiameterDC
6 mm
Diameter ToleranceDC tol
0.003/-0.003
Shank DiameterDMM
6 mm
Length of Cut (LOC)APMX
14 mm
Overall Length (OAL)OAL
50 mm
Number of FlutesNOF
2
End Type
118º Drill Tip
Center Cutting
Yes — plunges
Tip Material
Brazed PCD (polycrystalline diamond)
Re-sharpenable
Yes
Series
MCPCD-118 — 2 Flute Standard Length Drill Point Metric PCD-Tipped Diamond Router

Cuts these materials

AluminumCopper & BrassMagnesiumPlasticsComposites

Applications

SlottingSide MillingHelical InterpolationRampingRoughingSemi-FinishingFinishingDryWetCold AirSpray Mist

Features

PCD Diamond

See it run · 2 videos

Tolerances

TypeMinMax
Cutting Diameter+0.003-0.003
Length of Cut+0.03-0.03
Overall Length+0.06-0.06
Shank Diameter-0.0001-0.0002
Starting at$510.65

Made & shipped in the USA · lead time confirmed at order. Buy at retail or through your distributor.

Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.

Adds Uncoated · $510.65 — our pick for your material. Choose another finish below.

Calculate Speeds & Feeds
CADDXF·STEP
Add to Quote
Download ISO 13399 data (.csv)

Proven in the field

See the case studies →

Finishes (1)

  • Uncoated

    MCPCD-203-06-118

    $510.65

    Available to order

Compare tool coatings →

Starting at

$510.65

Performance guaranteed

More in the MCPCD-118 series

Same series, different size — what changes from this tool is shown in red.