M50-0150-13-24
50mm Diameter 13mm Arbor 24 Teeth Solid Carbide Saw for Non-Ferrous
50mm Diam. Slitting Saw, 0.15mm Thick, 13mm ID, 24 teeth
OrderingM50-0150-13-24·Uncoated
About this series
Solid Carbide Slitting Saws
Tight widths and finishes HSS can't hold.
RobbJack solid carbide slitting saws are ground to ANY thickness up to 0.250" in 0.0001" increments — the listing shows common price-break thicknesses, but every size in between is standard. Coarse-pitch teeth suit non-ferrous materials and fine-pitch suit ferrous; standard-concavity covers general use, while K-series double-concavity, alternate-tooth-chamfer versions handle deep cuts.
- Any thickness up to 0.250" in 0.0001" increments — every size between the listed price breaks is standard
- Minimum thickness by diameter: 0.002" (3/4"–1"), 0.004" (1¼"–2"), 0.006" (2¼"–4"); K-series 0.020"
- Coarse pitch for non-ferrous, fine pitch for ferrous
- Standard and K-series double-concavity / alternate-tooth-chamfer versions
- Optional T-Process, hub, keyway and PVD coatings
- Thru-coolant saw systems available on NAB / AB arbors with CF flanges
Mounts on AB and NAB saw arbors. Choose K-series double-concavity saws for slots deeper than 3× the saw thickness.
Headline spec
Thickness tol +.0002/−.0000; diameter +.002/−.000
Best for
- Slotting & parting
- Tight-tolerance widths
- Ferrous & non-ferrous
Compatible saw arbors · 13 mm bore
MSA-13RecommendedMetric ultra-precision saw arbor · 11.999 mm shank
Max DOC *
13.73 mm
Arbors that fit this saw's 13 mmarbor hole, recommended order first. * Max depth of cut = (saw diameter − arbor flange) ÷ 2, less a 0.050″ clearance cushion. Verify for your setup.
Specifications
US machining terms with ISO 13399 codes.
- DiameterDC
- 50 mm
- Saw Thickness
- 0.15 mm
- Arbor Diameter
- 13 mm
- Number of TeethNOF
- 24
- Max Depth of Cut (MSA-13) *
- 13.741 mm
- Cuts
- Aluminum, Copper Alloy, Magnesium, Plastics, Composites
- Series
- M50-13-24 — 50mm Diameter 13mm Arbor 24 Teeth Solid Carbide Saw for Non-Ferrous
* Max depth of cut = (saw diameter − arbor flange) ÷ 2, less a 0.050″ clearance cushion. See per-arbor values below.
Cuts these materials
Features
See it run · 4 videos
Tolerances
| Type | Min | Max |
|---|---|---|
| Arbor Diameter | +0.005 | +0.01 |
| Concavity | +0.01 | 0 |
| Outside Diameter | +0.05 | 0 |
| Thickness | +0.005 | 0 |
Choose the finish(1 option)
Compare →Each finish is a different part number and price.
Part M50-0150-13-24
Made & shipped in the USA · lead time confirmed at order. Test this tool in your spindle at retail, or get it through your RobbJack distributor.
Performance guaranteed. Run it against the tool you use today — if it doesn't beat it, we'll make it right.
Proven in the field
- $548,290saved per year drilling carbon-fiber aircraft
- $216,000saved per year trimming aircraft skins
- 1,000%metal-removal increase in Inconel 718 (SPS)
Need an in-between thickness?
Any thickness between this family's standard sizes is a standard order, not a special — the part number carries your exact thickness, priced as the next thicker catalog saw.
Starting at
Quote
M50-0150-13-24
Thru-Coolant NAB Precision Saw Arbor
Slitting saws fail when coolant can't reach the cut — external flood gets blocked by fixturing and part geometry. The NAB arbor delivers coolant through the center and out through thru-coolant flanges onto both faces of every saw— equal pressure, right where the cut happens. Precision-ground to 25 millionths and grips the saw up to 15× more tightly — so it can't slip or spin on the arbor — for faster speeds & feeds, no walking, and far longer tool life.
- 0.000025″
- tolerance — 25 millionths
- 15×
- grip on the saw vs. a typical arbor
- ≈80%
- fewer causes of saw failure
- ↑ S&F
- faster speeds & feeds, longer life
Recommended for your 0.5118″ bore saw
Contact application engineering for the thru-coolant arbor that fits this saw bore.
-TC arbors include steel thru-coolant outer flanges and steel spacers. Solid carbide flanges and spacers are recommended to eliminate burrs and potential issues — carbide lasts a lifetime and never scratches the saw. Add thru-coolant spacers to gang multiple saws.
Available in any thickness — 0.0059″ to 0.2362″
This saw is stocked in 13 standard thicknesses, but any thickness between 0.0059″ and 0.2362″ is a standard order, not a special — you order in ten-thousandths of an inch and RobbJack grinds it, priced as the next thicker catalog size. Thickness is held to +.0002″/−.0000″, and the part number carries your exact thickness. Enter your size in the in-between thickness panel above to get the part number and price. Saws thinner than .010″ are specials and non-returnable; most thicknesses from .008″ to .250″ ship within about 48 hours.
More in the M50-13-24 series
Same series, different size — what changes from this tool is shown in red.
- M50-0200-13-240.2 mm thickØ 50 mm24T13 mm bore
- M50-0400-13-240.4 mm thickØ 50 mm24T13 mm bore
- M50-0600-13-240.6 mm thickØ 50 mm24T13 mm bore
- M50-1000-13-241 mm thickØ 50 mm24T13 mm bore
- M50-1200-13-241.2 mm thickØ 50 mm24T13 mm bore
- M50-1600-13-241.6 mm thickØ 50 mm24T13 mm bore
- M50-2000-13-242 mm thickØ 50 mm24T13 mm bore
- M50-2500-13-242.5 mm thickØ 50 mm24T13 mm bore
- M50-3000-13-243 mm thickØ 50 mm24T13 mm bore
- M50-4000-13-244 mm thickØ 50 mm24T13 mm bore
- M50-5000-13-245 mm thickØ 50 mm24T13 mm bore
- M50-6000-13-246 mm thickØ 50 mm24T13 mm bore