Accupro → RobbJack cross-reference
Running Accupro — known for MSC Industrial's house-brand solid-carbide end mills (square, ball, corner-radius, chamfer)? Enter your Accupro part number below and we'll look up its specs, then match the closest RobbJack equivalent. Cross an Accupro end mill by exact dimensions to the RobbJack tool engineered for your material — USA-made carbide with per-tool speeds & feeds, the step up from a catalog-house general-purpose tool.
What is a good alternative to Accupro end mills?
The closest USA-made alternative to Accupro end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. Accupro's ASQSC4-AT-CC-40H, ASQSC2-TC-CC-40H and ASQSC2-AT-CC-40H lines cross most often to RobbJack's C1 line, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any Accupro part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.
| Accupro | Sizes | RobbJack equivalent | Why it crosses |
|---|---|---|---|
| ASQSC4-AT-CC-40H | .118"–1" | C1C-2 Grade Carbide End Mill | Same 4-flute, square end geometry; 92% of the sizes we checked have an exact RobbJack standard. |
| ASQSC2-TC-CC-40H | .109"–1" | C1C-2 Grade Carbide End Mill | Same 2-flute, square end geometry; 92% of the sizes we checked have an exact RobbJack standard. |
| ASQSC2-AT-CC-40H | .109"–1" | C1C-2 Grade Carbide End Mill | Same 2-flute, square end geometry; 92% of the sizes we checked have an exact RobbJack standard. |
| ABSC2-AT-CC-40H | .031"–1" | BTuffy Grade Carbide Ball End Mill | Same 2-flute, ball end geometry; 88% of the sizes we checked have an exact RobbJack standard. |
| ABSC2-CC-40H | .031"–1" | BTuffy Grade Carbide Ball End Mill | Same 2-flute, ball end geometry; 88% of the sizes we checked have an exact RobbJack standard. |
| ABSC2-TC-CC-40H | .031"–1" | BTuffy Grade Carbide Ball End Mill | Same 2-flute, ball end geometry; 88% of the sizes we checked have an exact RobbJack standard. |
| ASQSC4-CC-40H | .031"–1" | C1C-2 Grade Carbide End Mill | Same 4-flute, square end geometry; 93% of the sizes we checked have an exact RobbJack standard. |
| ASQSC4-TC-CC-40H | .109"–1" | C1C-2 Grade Carbide End Mill | Same 4-flute, square end geometry; 92% of the sizes we checked have an exact RobbJack standard. |
Matched by RobbJack's cross-reference engine against Accupro's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.
Switching to RobbJack?
Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.
Crossing a Accupro tool to RobbJack
There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your Accupro part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.
Don't see a match? RobbJack builds a huge range of specials. Send us the Accupro part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. Accupro is a trademark of its owner; RobbJack is not affiliated with Accupro, and cross-references are for identification only.
How do I cross-reference a Accupro part number to RobbJack?
Enter the Accupro part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.
What is the RobbJack equivalent of Accupro ASQSC4-AT-CC-40H?
Accupro ASQSC4-AT-CC-40H 4-flute end mills most often cross to the RobbJack C1 line (C-2 Grade Carbide End Mill) — for example C1-401-08. Same 4-flute, square end geometry; 92% of the sizes we checked have an exact RobbJack standard. Enter your exact Accupro part number in the tool on this page for the size-for-size match.
Popular Accupro part numbers and their RobbJack equivalents
- 00037580→ RobbJack C1-201-08
- 00037598→ RobbJack C1-201-04
- 00037606→ RobbJack C1-201-12
- 00037689→ RobbJack ST-430-04
- 00037697→ RobbJack ST-430-08
- 00037705→ RobbJack ST-430-12
- 00037713→ RobbJack C1-401-08
- 00037721→ RobbJack C1-401-10
- 00037739→ RobbJack C1-401-12
- 00037747→ RobbJack C1-401-24
- 00037804→ RobbJack ST-430-04
- 00037812→ RobbJack ST-430-04
- 00037820→ RobbJack ST-430-06
- 00037838→ RobbJack ST-430-06
- 00037846→ RobbJack ST-430-08
- 00037853→ RobbJack ST-430-08