Garr Tool → RobbJack cross-reference
Running Garr Tool — known for general-purpose and high-performance solid-carbide end mills? Enter your Garr Tool part number below and we'll look up its specs, then match the closest RobbJack equivalent. The RobbJack equivalent of a Garr standard is typically a faster-cutting, longer-lasting upgrade — not just a like-for-like swap.
What is a good alternative to Garr Tool end mills?
The closest USA-made alternative to Garr Tool end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. Garr Tool's VRX, V4R and V5 lines cross most often to RobbJack's SPS line, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any Garr Tool part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.
| Garr Tool | Sizes | RobbJack equivalent | Why it crosses |
|---|---|---|---|
| VRX | .059"–1" | SPSSPS Super Python Series | Same 4-flute, corner radius, ball end, square end geometry; 90% of the sizes we checked have an exact RobbJack standard. |
| V4R | .156"–1" | SPSSPS Super Python Series | Same 4-flute, corner radius geometry; 99% of the sizes we checked have an exact RobbJack standard. |
| V5 | .236"–1" | SPSSPS Super Python Series | Same 5-flute, square end, corner radius geometry; 99% of the sizes we checked have an exact RobbJack standard. |
| A3 | .156"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, square end, corner radius, ball end geometry; 94% of the sizes we checked have an exact RobbJack standard. |
| X5 | .156"–1" | SPSSPS Super Python Series | Same 5-flute, square end, corner radius geometry; 75% of the sizes we checked have an exact RobbJack standard. |
| G5 | .156"–1" | SPSSPS Super Python Series | Same 5-flute, square end, corner radius geometry; 75% of the sizes we checked have an exact RobbJack standard. |
| 143R | .118"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, corner radius geometry; 88% of the sizes we checked have an exact RobbJack standard. |
| X3 | .031"–.250" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, square end, corner radius geometry; 57% of the sizes we checked have an exact RobbJack standard. |
Matched by RobbJack's cross-reference engine against Garr Tool's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.
Switching to RobbJack?
Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.
Crossing a Garr Tool tool to RobbJack
There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your Garr Tool part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.
Don't see a match? RobbJack builds a huge range of specials. Send us the Garr Tool part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. Garr Tool is a trademark of its owner; RobbJack is not affiliated with Garr Tool, and cross-references are for identification only.
How do I cross-reference a Garr Tool part number to RobbJack?
Enter the Garr Tool part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.
What is the RobbJack equivalent of Garr Tool VRX?
Garr Tool VRX 4-flute end mills most often cross to the RobbJack SPS line (SPS Super Python Series) — for example SPS-403-08-010. Same 4-flute, corner radius, ball end, square end geometry; 90% of the sizes we checked have an exact RobbJack standard. Enter your exact Garr Tool part number in the tool on this page for the size-for-size match.
Popular Garr Tool part numbers and their RobbJack equivalents
- 01030→ RobbJack C1-201-02
- 01037→ RobbJack SR-2-062
- 01040→ RobbJack C1-201-03
- 01047→ RobbJack T6-202-03
- 01050→ RobbJack C1-201-04
- 01057→ RobbJack T12-201-04
- 01060→ RobbJack C1-201-05
- 01067→ RobbJack T12-203-05
- 01070→ RobbJack C1-201-06
- 01077→ RobbJack T12-203-06
- 01090→ RobbJack C1-201-08
- 01097→ RobbJack T12-203-08
- 01100→ RobbJack C1-201-10
- 01107→ RobbJack T12-203-10
- 01110→ RobbJack C1-201-12
- 01117→ RobbJack T12-203-12