Kennametal → RobbJack cross-reference
Running Kennametal — known for production solid-carbide and indexable tooling? Enter your Kennametal part number below and we'll look up its specs, then match the closest RobbJack equivalent. Match Kennametal's solid-carbide end mills to a RobbJack equivalent you can buy direct to trial — performance guaranteed against the tool you run today.
What is a good alternative to Kennametal end mills?
The closest USA-made alternative to Kennametal end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. Kennametal's HARVI I TE, HARVI III Aero and KenCut AL AADE lines cross most often to RobbJack's SPS and ST and AL3 lines, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any Kennametal part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.
| Kennametal | Sizes | RobbJack equivalent | Why it crosses |
|---|---|---|---|
| HARVI I TE | .063"–1.25" | SPSSPS Super Python Series | Same 4-flute, corner radius, square end, ball end geometry; 95% of the sizes we checked have an exact RobbJack standard. |
| HARVI III Aero | .500"–1.25" | STSuper Tuffy Grade Carbide End Mill | Same 6-flute, corner radius, ball end geometry; 61% of the sizes we checked have an exact RobbJack standard. |
| KenCut AL AADE | .125"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, square end, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| MaxiMet | .188"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, square end, corner radius geometry; 99% of the sizes we checked have an exact RobbJack standard. |
| HARVI II | .188"–1" | SPSSPS Super Python Series | Same 5-flute, corner radius, square end geometry; 93% of the sizes we checked have an exact RobbJack standard. |
| HARVI III | .375"–1.25" | STSuper Tuffy Grade Carbide End Mill | Same 6-flute, corner radius, square end, ball end geometry; 80% of the sizes we checked have an exact RobbJack standard. |
| HARVI II Long | .250"–1" | SPSSPS Super Python Series | Same 5-flute, square end, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| KenCut AL AADF | .125"–.750" | C1C-2 Grade Carbide End Mill | Same 2-flute, square end, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
Matched by RobbJack's cross-reference engine against Kennametal's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.
Switching to RobbJack?
Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.
Crossing a Kennametal tool to RobbJack
There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your Kennametal part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.
Don't see a match? RobbJack builds a huge range of specials. Send us the Kennametal part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. Kennametal is a trademark of its owner; RobbJack is not affiliated with Kennametal, and cross-references are for identification only.
How do I cross-reference a Kennametal part number to RobbJack?
Enter the Kennametal part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.
What is the RobbJack equivalent of Kennametal HARVI I TE?
Kennametal HARVI I TE 4-flute end mills most often cross to the RobbJack SPS line (SPS Super Python Series) — for example SPS-401-08-010. Same 4-flute, corner radius, square end, ball end geometry; 95% of the sizes we checked have an exact RobbJack standard. Enter your exact Kennametal part number in the tool on this page for the size-for-size match.
Popular Kennametal part numbers and their RobbJack equivalents
- 2402999→ RobbJack C1-201-04
- 2403000→ RobbJack C1-201-06
- 2403001→ RobbJack C1-201-08
- 2403013→ RobbJack C1-201-12
- 2403014→ RobbJack HB-404-16
- 2403016→ RobbJack C1-201-24
- 2658352→ RobbJack AL3-303-08
- 2658444→ RobbJack AL3-303-12
- 2658445→ RobbJack AL3-303-16
- 2658446→ RobbJack AL3-304-16
- 2658448→ RobbJack AL3-304-20
- 2658449→ RobbJack AL3-303-24
- 2658450→ RobbJack AL3-303-24
- 2658452→ RobbJack AL3-303-32
- 3331481→ RobbJack AL3-303-08-030
- 3331482→ RobbJack SPS-403-08-030