Guhring → RobbJack cross-reference
Running Guhring — known for solid-carbide end mills and round tools from a global drill powerhouse? Enter your Guhring part number below and we'll look up its specs, then match the closest RobbJack equivalent. Cross a Guhring end mill to the RobbJack equivalent by size and flute count — with free CAD on every tool and machining data your machine can actually run.
What is a good alternative to Guhring end mills?
The closest USA-made alternative to Guhring end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. Guhring's 3498, 3499 and 6759 lines cross most often to RobbJack's MXG and SPS lines, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any Guhring part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.
| Guhring | Sizes | RobbJack equivalent | Why it crosses |
|---|---|---|---|
| 3498 | .236"–.984" | MXGVariable Helix Metric Tuffy Grade Carbide End Mill | Same 4-flute, corner radius geometry for titanium; 85% of the sizes we checked have an exact RobbJack standard. |
| 3499 | .236"–.984" | MXGVariable Helix Metric Tuffy Grade Carbide End Mill | Same 4-flute, corner radius geometry for titanium; 85% of the sizes we checked have an exact RobbJack standard. |
| 6759 | .125"–1" | SPSSPS Super Python Series | Same 4-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| 3146 | .063"–1" | NRC-2 Grade Carbide End Mill | Same 2-flute, square end geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| 3148 | .063"–1" | NRC-2 Grade Carbide End Mill | Same 2-flute, square end geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| 3150 | .063"–1" | NRC-2 Grade Carbide End Mill | Same 4-flute, square end geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| 3153 | .063"–1" | NRC-2 Grade Carbide End Mill | Same 4-flute, square end geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| 3157 | .063"–1" | BTuffy Grade Carbide Ball End Mill | Same 2-flute, ball end geometry; 91% of the sizes we checked have an exact RobbJack standard. |
Matched by RobbJack's cross-reference engine against Guhring's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.
Switching to RobbJack?
Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.
Crossing a Guhring tool to RobbJack
There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your Guhring part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.
Don't see a match? RobbJack builds a huge range of specials. Send us the Guhring part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. Guhring is a trademark of its owner; RobbJack is not affiliated with Guhring, and cross-references are for identification only.
How do I cross-reference a Guhring part number to RobbJack?
Enter the Guhring part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.
What is the RobbJack equivalent of Guhring 3498?
Guhring 3498 4-flute end mills most often cross to the RobbJack MXG line (Variable Helix Metric Tuffy Grade Carbide End Mill) — for example MXG-402-06. Same 4-flute, corner radius geometry for titanium; 85% of the sizes we checked have an exact RobbJack standard. Enter your exact Guhring part number in the tool on this page for the size-for-size match.