YG-1 → RobbJack cross-reference
Running YG-1 — known for broad-range solid-carbide and HSS cutting tools? Enter your YG-1 part number below and we'll look up its specs, then match the closest RobbJack equivalent. Trade up from a YG-1 standard to a RobbJack solid-carbide equivalent built and ground in the USA.
What is a good alternative to YG-1 end mills?
The closest USA-made alternative to YG-1 end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. YG-1's E5G97, JAG97 and UGMG22 lines cross most often to RobbJack's AL3 and ST lines, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any YG-1 part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.
| YG-1 | Sizes | RobbJack equivalent | Why it crosses |
|---|---|---|---|
| E5G97 | .125"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, corner radius geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| JAG97 | .125"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, corner radius geometry; 97% of the sizes we checked have an exact RobbJack standard. |
| UGMG22 | .250"–1" | STSuper Tuffy Grade Carbide End Mill | Same 6-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| UGMF70 | .125"–1" | SPSSPS Super Python Series | Same 4-flute, corner radius geometry; 91% of the sizes we checked have an exact RobbJack standard. |
| E5G98 | .125"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| JAG98 | .125"–1" | AL33 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill | Same 3-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| UGMF74 | .125"–1" | SPSSPS Super Python Series | Same 4-flute, corner radius, square end geometry; 100% of the sizes we checked have an exact RobbJack standard. |
| UGMH09 | .250"–1" | STSuper Tuffy Grade Carbide End Mill | Same 6-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard. |
Matched by RobbJack's cross-reference engine against YG-1's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.
Switching to RobbJack?
Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.
Crossing a YG-1 tool to RobbJack
There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your YG-1 part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.
Don't see a match? RobbJack builds a huge range of specials. Send us the YG-1 part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. YG-1 is a trademark of its owner; RobbJack is not affiliated with YG-1, and cross-references are for identification only.
How do I cross-reference a YG-1 part number to RobbJack?
Enter the YG-1 part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.
What is the RobbJack equivalent of YG-1 E5G97?
YG-1 E5G97 3-flute end mills most often cross to the RobbJack AL3 line (3 Flute Aluminum Chatter Reduction Hi-Performance Carbide End Mill) — for example AL3-303-04-010. Same 3-flute, corner radius geometry; 97% of the sizes we checked have an exact RobbJack standard. Enter your exact YG-1 part number in the tool on this page for the size-for-size match.
Popular YG-1 part numbers and their RobbJack equivalents
- E5G95008→ RobbJack AL3-303-04
- E5G95012→ RobbJack AL3-303-06
- E5G95016→ RobbJack AL3-303-08
- E5G95020→ RobbJack AL3-303-10
- E5G95024→ RobbJack AL3-303-12
- E5G95028→ RobbJack C1-301-14
- E5G95032→ RobbJack AL3-303-16
- E5G95040→ RobbJack AL3-303-20
- E5G95048→ RobbJack AL3-303-24
- E5G95064→ RobbJack AL3-303-32
- E5G95901→ RobbJack AL3-303-04
- E5G95902→ RobbJack AL3-303-06
- E5G95903→ RobbJack AL3-303-08
- E5G95904→ RobbJack AL3-305-08
- E5G95905→ RobbJack AL3-303-10
- E5G95906→ RobbJack AL3-304-10