Skip to content
Switch & save

Sandvik Coromant → RobbJack cross-reference

Running Sandvik Coromant — known for CoroMill solid-carbide end mills for steel, stainless, and ISO-S alloys? Enter your Sandvik Coromant part number below and we'll look up its specs, then match the closest RobbJack equivalent. Cross a CoroMill solid-carbide end mill to the RobbJack line built for the same material — made in the USA, with free per-tool machining data.

What is a good alternative to Sandvik Coromant end mills?

The closest USA-made alternative to Sandvik Coromant end mills is RobbJack, an employee-owned manufacturer that has built solid carbide cutting tools in Lincoln, California since 1959. Sandvik Coromant's R216.2x..50CC..P (NECK), 2F345-TD and 2S344-CTD lines cross most often to RobbJack's MXG line, with free tested speeds and feeds, CAD and CAM libraries, and a performance guarantee on a trial tool — enter any Sandvik Coromant part number below and we match the closest RobbJack equivalent by actual spec, not by catalog page.

Sandvik Coromant end mill lines and the RobbJack line they cross to
Sandvik CoromantSizesRobbJack equivalentWhy it crosses
R216.2x..50CC..P (NECK).079"–.787"MXGVariable Helix Metric Tuffy Grade Carbide End MillSame 4-flute, corner radius geometry; 88% of the sizes we checked have an exact RobbJack standard.
2F345-TD.236"–.984"MXGVariable Helix Metric Tuffy Grade Carbide End MillSame 5-flute, corner radius geometry; 81% of the sizes we checked have an exact RobbJack standard.
2S344-CTD.236"–.984"MXGVariable Helix Metric Tuffy Grade Carbide End MillSame 4-flute, corner radius geometry; 81% of the sizes we checked have an exact RobbJack standard.
R216.2x..CK/L..P.394"–.984"MXGVariable Helix Metric Tuffy Grade Carbide End MillSame 4-flute, corner radius geometry; 84% of the sizes we checked have an exact RobbJack standard.
1K223-NH (RAD).236"–.984"MFMHVMetric High Velocity Chatter-Free Solid Carbide End Mill for AluminumSame 3-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard.
1K233-NB (RAD).236"–.984"MFMHVMetric High Velocity Chatter-Free Solid Carbide End Mill for AluminumSame 3-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard.
2S342-CMB (2).236"–.787"MXGVariable Helix Metric Tuffy Grade Carbide End MillSame 4-flute, corner radius geometry; 100% of the sizes we checked have an exact RobbJack standard.
2F340..SC (INCH).188"–1.25"XFHigh Performance Tuffy Grade Carbide End MillSame 6-flute, corner radius geometry; 85% of the sizes we checked have an exact RobbJack standard.

Matched by RobbJack's cross-reference engine against Sandvik Coromant's published end mill specs, exact standard sizes only. Your exact part number below gives the size-for-size match.

Have the part number?

We'll look up its specs and fill this in for you.

Tool specs

Diameter matters most. Adjust anything the lookup got wrong.

Switching to RobbJack?

Enter your current tool's part number and we'll look up its specs — or type them in — and match the closest RobbJack equivalent, ranked by fit, with speeds & feeds and a quote one click away.

Crossing a Sandvik Coromant tool to RobbJack

There's no universal part-number standard across cutting-tool brands, so we match on what actually determines performance: cutting diameter, flute count, end type and corner radius, length of cut, work material, and coating. Enter your Sandvik Coromant part number and we'll look up those specs automatically — or type in what you know. RobbJack matches your size to its nearest standard (for example RobbJack's .030 corner radius for a .031), and you can require an exact match or allow a near-size upgrade.

Don't see a match? RobbJack builds a huge range of specials. Send us the Sandvik Coromant part number and our application engineers will cross-reference it directly — often a longer-lasting, faster-cutting upgrade, not just a like-for-like swap. Sandvik Coromant is a trademark of its owner; RobbJack is not affiliated with Sandvik Coromant, and cross-references are for identification only.

How do I cross-reference a Sandvik Coromant part number to RobbJack?

Enter the Sandvik Coromant part number in the cross-reference tool on this page. It looks up that tool's specs and matches the closest RobbJack standard on what determines performance — cutting diameter, flute count, end type and corner radius, length of cut, work material and coating. If nothing matches, send the part number and a RobbJack application engineer will cross it by hand.

What is the RobbJack equivalent of Sandvik Coromant R216.2x..50CC..P (NECK)?

Sandvik Coromant R216.2x..50CC..P (NECK) 4-flute end mills most often cross to the RobbJack MXG line (Variable Helix Metric Tuffy Grade Carbide End Mill) — for example MXG-402-06. Same 4-flute, corner radius geometry; 88% of the sizes we checked have an exact RobbJack standard. Enter your exact Sandvik Coromant part number in the tool on this page for the size-for-size match.

Popular Sandvik Coromant part numbers and their RobbJack equivalents

Cross-reference another brand

Harvey ToolHelical SolutionsKennametalGarr ToolFullerton ToolNiagara CutterDestiny ToolIMCO Carbide ToolLMT OnsrudCoreHogSeco ToolsPCT — Precision Cutting ToolsFraisaYG-1OSGSGS / KyoceraData FluteMelin ToolRock River ToolJohnson CarbideGaylee SawsMcMaster-CarrSwiftCARBWidia (Hanita)IscarGuhringM.A. FordTitan USASpeed TigerMonster ToolMicro 100AccuproGorilla Mill