-
FM-203-32-030
2 Flute Aluminum Chatter-Free Long Reach High Performance Carbide End Mill
FM-series - SEE IN ACTION ON ROBBJACK TV
1-in Dia 2-Flute End Mill, 1-in LOC, 1-in Shank, 6-in OAL, 0.03-in CR, 3.5-in Reach
2 Flute Long Reach High Performance Carbide End Mill
PREVIEW AND DIAGRAM (FM-203)
Specifications
| Cutting Dia | 1″ |
| Flute Len | 1″ |
| Shank Dia | 1″ |
| Overall Len | 6″ |
| Reach Len | 3.5″ |
| Corner Radius | 0.03″ |
Tolerances
| Cutting Diameter | −.001/−.0015″ |
| Length of Cut | +.060/−.000″ |
| Shank Diameter | −.0001/−.0002″ |
| Overall Length | ±.060″ |
Catalog
| Catalog Page | 19 |
Speed & Feeds
| Tool Diameter | Typical Z-Depth | Aluminum 6061-T6 | Aluminum 6061-T3 | Aluminum 7075 | Aluminum 2024 | ||||
|---|---|---|---|---|---|---|---|---|---|
| Tool Diam | Z-Depth | RPM | CLPT | RPM | CLPT | RPM | CLPT | RPM | CLPT |
| 1/4" | 0.1500" | Max | 0.0040" | Max | 0.0035" | Max | 0.0040" | Max | 0.0040" |
| 5/16" | 0.1500" | Max | 0.0050" | Max | 0.0044" | Max | 0.0050" | Max | 0.0050" |
| 3/8" | 0.1875" | Max | 0.0060" | Max | 0.0053" | Max | 0.0060" | Max | 0.0060" |
| 1/2" | 0.2000" | Max | 0.0080" | Max | 0.0070" | Max | 0.0080" | Max | 0.0080" |
| 5/8" | 0.2000" | Max | 0.0100" | Max | 0.0088" | Max | 0.0100" | Max | 0.0100" |
| 3/4" | 0.2500" | Max | 0.0120" | Max | 0.0105" | Max | 0.0120" | Max | 0.0120" |
| 1" | 0.2500" | Max | 0.0160" | Max | 0.0140" | Max | 0.0160" | Max | 0.0160" |
Other Tools in this Series
| Tool # | Cutting Dia | Flute Len | Shank Dia | Overall Len | Reach Len | Corner Radius | Coatings | Pg. # |
|---|---|---|---|---|---|---|---|---|
| FM-203-32 | 1″ | 1″ | 1″ | 6″ | 3.5″ | 0″ | Uncoated DLC | 19 |
| FM-203-32-060 | 1″ | 1″ | 1″ | 6″ | 3.5″ | 0.06″ | Uncoated DLC | 19 |
| FM-203-32-090 | 1″ | 1″ | 1″ | 6″ | 3.5″ | 0.09″ | Uncoated DLC | 19 |
| FM-203-32-120 | 1″ | 1″ | 1″ | 6″ | 3.5″ | 0.12″ | Uncoated DLC | 19 |
| FM-203-32-BN | 1″ | 1″ | 1″ | 6″ | 3.5″ | 0.5″ | Uncoated DLC | 19 |
close