25mm Diam. Slitting Saw, 3mm Thick, 8mm ID, 12 teeth

Our precision ground 25mm diameter solid carbide saws are best used for non-ferrous materials, such as aluminum, copper, and plastics. They have 12 teeth with a 10 degree rake angle, and a 8mm inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 4 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness or you need to have a slitting saw with the highest performance see the MK25-08-12 series saw. The recommended maximum total depth of cut with a M25-08-12 using an MSA-08 saw arbor is 0.127".

PREVIEW AND DIAGRAM (M25-08-12)

Specifications

Saw Dia 0.9843″
Thickness 0.1181″
Arbor Dia 0.315″
Teeth 12″

Tolerances

Arbor Diameter+0.127/+0.254 mm
Outside Diameter+1.27/−0 mm
Thickness+0.127/−0 mm
Concavity+0.254/−0 mm

Catalog

Catalog Page 118

Speed & Feeds

MaterialMax ADP xThicknessTeethSFMCLPT (0.002"-0.031")CLPT (0.031"-0.100")CLPT (> 0.100" thick)SMMCLPT (0.05mm - 1.0mm)CLPT (1.0mm - 3.0mm)CLPT (> 3.0mm thick)
ALUMINUM4Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
20244Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
6061 (T1-T3)4Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
6061 (T4-T6)4Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
70754Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
NON-FERROUS
Brass4Coarse750.000234”/.000273”.000273”/.00052”0.0004”230.0059mm/.0069mm.0069mm/.013mm0.013mm
Copper4Coarse600.000234”/.000273”.000273”/.00052”0.0004”190.0059mm/.0069mm.0069mm/.013mm0.013mm
Magnesium4Coarse3600.000234”/.000273”.000273”/.00052”0.0004”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
TITANIUM
Com.Pure2Fine700.00018”/.00021”.00021”/.0004”0.0004”210.0046mm/.0053mm.0053mm/.010mm0.010mm
6AL-4V2Fine350.00018”/.00021”.00021”/.0004”0.0004”105.0046mm/.0053mm.0053mm/.010mm0.010mm
6AL-6V2Fine230.00018”/.00021”.00021”/.0004”0.0004”70.0046mm/.0053mm.0053mm/.010mm0.010mm
STEEL
1018-10204Fine350.00018”/.00021”.00021”/.0004”0.0004”110.0046mm/.0053mm.0053mm/.010mm0.010mm
41302Fine260.00018”/.00021”.00021”/.0004”0.0004”80.0046mm/.0053mm.0053mm/.010mm0.010mm
41402Fine220.00018”/.00021”.00021”/.0004”0.0004”70.0046mm/.0053mm.0053mm/.010mm0.010mm
43402Fine280.00018”/.00021”.00021”/.0004”0.0004”90.0046mm/.0053mm.0053mm/.010mm0.010mm
TOOL STEEL ANNEALED
A22Fine350.00018”/.00021”.00021”/.0004”0.0004”110.0046mm/.0053mm.0053mm/.010mm0.010mm
D22Fine260.00018”/.00021”.00021”/.0004”0.0004”80.0046mm/.0053mm.0053mm/.010mm0.010mm
H132Fine230.00018”/.00021”.00021”/.0004”0.0004”70.0046mm/.0053mm.0053mm/.010mm0.010mm
P202Fine350.00018”/.00021”.00021”/.0004”0.0004”110.0046mm/.0053mm.0053mm/.010mm0.010mm
STAINLESS STEEL
3032Fine500.00018”/.00021”.00021”/.0004”0.0004”150.0046mm/.0053mm.0053mm/.010mm0.010mm
3042Fine200.00018”/.00021”.00021”/.0004”0.0004”70.0046mm/.0053mm.0053mm/.010mm0.010mm
3162Fine240.00018”/.00021”.00021”/.0004”0.0004”75.0046mm/.0053mm.0053mm/.010mm0.010mm
15-5/17-4 PH2Fine200.00018”/.00021”.00021”/.0004”0.0004”60.0046mm/.0053mm.0053mm/.010mm0.010mm
440C2Fine200.00018”/.00021”.00021”/.0004”0.0004”60.0046mm/.0053mm.0053mm/.010mm0.010mm
INCONEL
625 / 7182Fine100.00018”/.00021”.00021”/.0004”0.0004”30.0046mm/.0053mm.0053mm/.010mm0.010mm
COMPOSITES
G10 Fiberglass / Polyester4Coarse1000.000234”/.000273”.000273”/.00052”0.00052”300.0059mm/.0069mm.0069mm/.013mm0.013mm
Graphite4Coarse1000.000234”/.000273”.000273”/.00052”0.00052”300.0059mm/.0069mm.0069mm/.013mm0.013mm
Graphite Fiber/Epoxy4Coarse800.000234”/.000273”.000273”/.00052”0.00052”250.0059mm/.0069mm.0069mm/.013mm0.013mm
CAST IRON
Ductile Iron2Fine350.00018”/.00021”.00021”/.0004”0.0004”110.0046mm/.0053mm.0053mm/.010mm0.010mm
Gray Cast Iron2Fine500.00018”/.00021”.00021”/.0004”0.0004”150.0046mm/.0053mm.0053mm/.010mm0.010mm
WOOD AND PLASTICS
Wood4Coarse3600.000234”/.000273”.000273”/.00052”0.00052”1100.0059mm/.0069mm.0069mm/.013mm0.013mm
Plastics4Coarse1600.000234”/.000273”.000273”/.00052”0.00052”400.0059mm/.0069mm.0069mm/.013mm0.013mm

Other Tools in this Series

Tool # Saw Dia Thickness Arbor Dia Teeth Pg. #
M25-0050-08-120.9843″0.002″0.315″12″118
M25-0100-08-120.9843″0.0039″0.315″12″118
M25-0150-08-120.9843″0.0059″0.315″12″118
M25-0200-08-120.9843″0.0079″0.315″12″118
M25-0400-08-120.9843″0.0157″0.315″12″118
M25-0600-08-120.9843″0.0236″0.315″12″118
M25-1000-08-120.9843″0.0394″0.315″12″118
M25-1200-08-120.9843″0.0472″0.315″12″118
M25-1600-08-120.9843″0.063″0.315″12″118
M25-2000-08-120.9843″0.0787″0.315″12″118
M25-2500-08-120.9843″0.0984″0.315″12″118
M25-4000-08-120.9843″0.1575″0.315″12″118
M25-5000-08-120.9843″0.1969″0.315″12″118
M25-6000-08-120.9843″0.2362″0.315″12″118
close

SPEEDS & FEEDS