-
P810-100200-1
Diamond Coated Center Drill for CFRP and Composites
P810-series - SEE IN ACTION ON ROBBJACK TV
Diamond Coated Center Drill 0.0250in Dia, 0.125in Shank, 1.50in OAL
P810 Series Diamond Coated Center Drill
PREVIEW AND DIAGRAM (P810-CD)
Specifications
| Cutting Dia | 0.025″ |
| Shank Dia | 0.125″ |
| Overall Len | 1.5″ |
| NC Thread | #00 |
| CSK Angle | 60.00 |
Tolerances
| Cutting Diameter | +.000/−.0005″ |
| Length of Cut | +.000/+.030″ |
| Shank Diameter | −.0002/−.0001″ |
| Overall Length | +.000/+.060″ |
Catalog
| Catalog Page | 62 |
Speed & Feeds
Other Tools in this Series
| Tool # | Cutting Dia | Shank Dia | Overall Len | NC Thread | CSK Angle | Pg. # |
|---|---|---|---|---|---|---|
| P810-100071-1 | 0.0313″ | 0.125″ | 1.5″ | #0 | 60.00 | 62 |
| P810-100072-1 | 0.0469″ | 0.125″ | 1.5″ | #1 | 60.00 | 62 |
| P810-100073-1 | 0.0781″ | 0.1875″ | 2″ | #2 | 60.00 | 62 |
| P810-100074-1 | 0.1094″ | 0.25″ | 2″ | #3 | 60.00 | 62 |
| P810-100075-1 | 0.125″ | 0.3125″ | 2.125″ | #4 | 60.00 | 62 |
| P810-100240-1 | 0.1875″ | 0.4375″ | 2.75″ | #5 | 60.00 | 62 |
close